It’s frustrating when you need your Philips razor to shave your body or beard hair, and it’s not turning on due to the low battery. Especially if it is not charging while you have tried different methods.
Several reasons will cause the issue that the Philips razor is not charging. I was also facing this issue for the last few days, and now it has been fixed. You should not worry about this problem because I am here to help you to fix it.
How to Fix Philips Razor Not Charging?
Here are several methods you should try to fix the Philips razor.
Quick Fixes
- Plug into the charger for 2 hours if you are charging it for the first time
- Verify that the power socket is not faulty
- Replace the power cable if it is faulty
- Place the razor correctly into the charging cradle
- Replace the battery; it might be dead
- Its hardware can be damaged
Charging the First Time
It can take too long to charge if you are charging your Philips razor for the first time or after a long time. When you are charging it after a long time, or firstly it charges slowly to prevent damage. So, it is the reason why your razor takes more time to charge.
Although it is not a serious problem, you should not be worried about it. Just plug the razor into the charge for at least two hours, and then check if it is charged. However, the LED can not light up for the first hour.
If the razor is still not charged, it can be another issue. So, read the below fixes that will be helpful.
Check Faulty Power Socket
There can be issues with your power socket, it might be faulty, and that’s why the Philips razor is not charging. May the power socket not provide enough electricity to charge the razor. Sometimes the charger might not be inserted correctly into this socket.
So, you should use another power source to charge the razor. Unplug it from the faulty power source and plug it into a new socket.
And make it sure the charging plug is inserted correctly into the socket. After this, verify that it is charging with the new power source.
Power Cable Issue
You should ensure that you are using an original Philips charging cable to charge the Philips razor; because the local and uncertified charging cord will cause damage to the razor. It also impacts its battery life, and the razor can start draining quickly.
On the other hand, you have to check that the cable is not faulty and it’s inserted correctly into the power socket and the razor. So, if it is defective and not providing electricity to charge it, you should instantly replace it.
To verify if the cable is defective, you should plug another device into this cable. If the new device is also not charging, the cable is faulty.
Place Correctly into Cradle
Although many users use a charging cradle to charge it; so, if you are also using a cradle to charge the Philips razor, you should ensure it is correctly placed into it. If you are using the cradle for the first time, you should check its method in the user manual.
- Plug the cradle into a power source
- Hold the razor in your hand and take it closer to the cradle
- Plug it into the charging cradle
- Ensure the logo on the razor and on the charging cradle are aligned on the same side
Make sure it is positioned in place and it is charging now. So, if your Philip razor is not charging, there might be another issue.
Replace Battery
However, the razor can have a problem with its battery, which might be dead and need to be replaced. Whenever you are overcharging or using a lot while its battery is too low, this can cause damage to the battery and reduce its life.
To fix this issue, you need to replace the dead battery. Buying a new and high-quality battery is recommended.
You should not overcharge the razor to prevent its battery from being damaged. Secondly, plug it into the charger while the battery is too low and don’t use it.
Hardware Issue
When the above method does not fix the Philips razor charging issue, it is possible the razor is soiled or damaged to such an extent its motor cannot move. The razor can have hardware damage and be hit by a hard surface.
So, for hardware issues, you should go to the nearest electric repair shop or contact the manufacturer.
If the issue is not fixed, you should verify that the razor is under warranty; you can replace it or repair it. Lastly, you should consider buying a new high-quality razor for yourself.
Check Travel Lock
A few Phillips razors or shavers have a travel lock function. And if this function is activated, the razor will not turn on. So, you should ensure the travel lock instead of charging if the razor is not turning on.
To deactivate this feature, you should press the power button for 3-5 seconds, and this feature will be deactivated. And then try to turn it back on.
How do I know if my Philips shaver is charging?
When you plug the Philips shaver into the charger, you will see an indicator light or battery symbols flashing on it. This light will turn off after 15 to 30 minutes after it’s ultimately charged.
Can you overcharge a Philips Shaver?
Lithium-ion batteries can be damaged because of overcharging. So, it is not best to overcharge your Philips razor for a long time. It will decrease its battery life, and the razor will start draining quickly.
How do you reset a Philips razor?
To reset the Philips razor, you should long press the power button for 5 seconds.
You should also read:
Why Andis clipper not charging
Babyliss beard trimmer not charging
Braun beard trimmer not charging
Conair trimmer is not charging
King C Gillette beard trimmer not charging