Andis clippers are popular among professional barbers and stylists due to their high-quality cutting performance and durability.
However, like any electronic device, Andis clippers can experience issues such as overheating. Overheating can occur for various reasons, including prolonged use, a malfunctioning motor, or a clogged blade.
It is important to address the issue of overheating promptly, as it can damage the clipper and potentially affect the device’s performance.
In this article, we will explore the causes of Andis clipper overheating and discuss potential solutions to help you get your clipper back up and running smoothly.
Why is Andis Clipper Overheating
Here are the reasons why your Andis clipper overheats.
Dull Clipper Blades
One potential cause of Andis clipper overheating is the use of dull clipper blades. When clipper blades become dull, they require more energy and effort to cut through hair, which can strain the motor and cause the clipper to overheat.
This is because the motor has to work harder to move the blades, leading to an increase in temperature.
Additionally, dull blades may cause the clipper to pull or snag on the hair, decreasing cutting performance and potentially causing the clipper to shut off unexpectedly.
Andis clippers, like any electronic device, can overheat due to prolonged use. When clippers are used for long periods, the motor and other internal components can become hot and cause the device to overheat.
This can be especially true if the clipper is being used continuously without breaks in between.
Overheating can lead to reduced performance and, in some cases, cause the clipper to shut off or malfunction.
Another reason that Andis clippers may overheat is due to a malfunctioning motor. The motor is responsible for driving the blades of the clipper, and if it is not functioning properly, it can cause the clipper to work harder than it should.
This can lead to the motor and other internal components becoming hot and causing the clipper to overheat.
If the motor is malfunctioning, it may also cause the clipper to perform poorly or not work at all.
How to Fix Andis Clippers Overheating Problem
These are the possible solutions that can fix your Andis Clipper overheating issue.
If your Andis clipper is overheating, one potential solution is to clean the blades. Over time, hair and other debris can build up on your clipper’s blades, which can cause the clipper to work harder and potentially overheat.
To clean the blades, you can follow these steps:
- Turn off the clipper and unplug it from the outlet.
- Remove the blades from the clipper. On most Andis clippers, you can do this by pressing a small lever or button and then sliding the blades off.
- Use a brush or a cloth to gently remove any visible debris from the blades.
- Once the blades are clean, you can reattach them to the clipper by sliding them back into place and pressing down until they lock into place.
- Plug in the clipper and turn it on to test it. If the clipper is still overheating, another issue may need to be addressed.
Sharpen the Blades
If your Andis clipper is overheating, one potential solution is to sharpen the blades. Over time, the blades on your clipper may become dull, which can cause the clipper to work harder and potentially overheat.
Sharpening the blades can help restore their cutting edge and improve the performance of your clipper.
To sharpen the blades on your Andis clipper, you can follow these steps:
- Remove the blades from the clipper.
- Use a blade-sharpening stone or a blade-sharpening tool to carefully sharpen the edges of the blades.
- Once the blades are sharp, you can reattach them to the clipper by sliding them back into place and pressing down until they lock into place.
- Turn on the clipper to test it. If the clipper is still overheating, there may be another issue.
It’s important to regularly sharpen your clipper blades to keep them in good working order and prevent overheating.
Oil the Blades
If your Andis clipper is overheating, one solution you can try is to oil the blades. This can help to reduce friction and heat build-up while the clipper is in use.
To oil the blades, follow these steps:
- Turn off your clipper and take an eyedropper to put the oil on the blades
- Drop a few drops of oil on the blades
- Turn the clipper on and let it run for about 10 seconds.
Oiling the blades regularly can help to keep your Andis clipper running smoothly and prevent overheating.
Don’t Rely on One Blade
If your Andis clipper is overheating, one solution you can try is to avoid relying on only one blade.
Using multiple blades can help reduce the amount of heat build-up in the clipper, as the blades can take turns cutting hair and cooling down.
The minimum you should use is two blades, but if you are going to be using the clipper for a long time or for heavy-duty cutting, you may want to take more blades with you.
If your Andis clipper is overheating, one solution you can try is to use ceramic blades instead of steel blades.
Ceramic blades are made from a ceramic material that is harder and more durable than steel.
They can also stay sharp for longer periods, which can help reduce the amount of heat build-up in the clipper.
Additionally, ceramic is a material that stays cooler than steel, which can help to prevent overheating.
Cool Down Clipper
If your Andis clipper is overheating, another solution you can try is to let it cool down. This can be especially helpful if you have been using the clipper for a long time and suspect it may be overheated.
To let the clipper cool down, follow these steps:
- Turn off the clipper and unplug it from the power source.
- Let the clipper sit for a few minutes to cool down.
- If the blades or clipper body are hot to the touch, allow them to cool down further before continuing to use the clipper.
- Once the clipper has cooled down, you can turn it back on and resume using it.
Check for Loose Connection or Damage
If your Andis clipper is overheating, one other solution you can try is to check for loose connections or damage.
A loose connection or damaged component can cause the clipper to work harder than it should, leading to overheating.
Fixing any loose connections or damaged parts can help improve your Andis clipper’s performance and prevent overheating.
If you cannot fix the problem on your own or suspect that there may be other underlying issues causing the overheating, you may need to take the clipper to a professional.
If your Andis clipper is overheating and none of the other solutions have worked, it is possible that the motor may be the cause of the issue.
The motor is responsible for powering the clipper; if it is damaged or not functioning properly, it can cause the clipper to overheat.
In this case, you may need to replace the motor to fix the overheating problem.
Replacing the motor can be complex and require specialized tools and knowledge.
Contact Customer Support
If your Andis clipper is overheating and none of the other solutions have worked, you may need to contact the manufacturer for further assistance.
The manufacturer may be able to provide additional troubleshooting steps or offer repair or replacement options.
If the clipper is still under warranty, you may be able to get it repaired or replaced at no cost.
If the warranty has expired, the manufacturer may still be able to repair the clipper, but it may cost you.
Alternatively, you can purchase a new clipper as a replacement.
In conclusion, if your Andis clipper is overheating, you can try several potential solutions.
These include oiling the blades, using multiple blades and replacing them when they overheat, letting the clipper cool down, checking for loose connections or damage, replacing the motor, using ceramic blades, or contacting the manufacturer for assistance.
If you cannot fix the problem on your own or suspect that there may be other underlying issues causing the overheating, you may need to take the clipper to a professional for repair or maintenance.