MANSCAPED 3 Lights Blinking (Detailed Solutions)

Are you new to using the Manscaped hair trimmer and don’t know the LED’s flashing/ blinking on it? Are you worried about why the three lights are blinking on your Manscaped?

If your Manscaped is blinking 3 lights don’t worry, it’s not an issue. LED indicates that your trimmer is running out of battery.

So, there are several light codes that you can understand while you know their functions. You can fulfill your trimmer’s requirements by reading these codes. 

Let’s get started!

Why are My MANSCAPED 3 Lights Blinking? 

If you were using the trimmer and it starts flashing LED lights rapidly, it means the trimmer runs out of battery. Its battery is low, and you should place it into the charger. 

MANSCAPED 3 Lights Blinking

On the other hand, if the trimmer was not being charged, the lights indicated to charge the battery. You should plug it into the charger, charge it thoroughly, and then use it. 

How to Fix Manscaped 3 Lights Blinking

As we know Manscaped blinks 3 lights to indicate to the user that it is running out the battery. So, to turn the light you should plug the trimmer into the charger.

Plug the charger into a power outlet and put the trimmer correctly into the charging cradle. A Manscaped trimmer might take 3 to 4 hours to fully charge.

Suppose you have been plugged it about 3 to 4 hours into the charger, but the trimmer still blinking 3 lights. It can be an indication that the battery is completely dead or might need to be replaced.

MANSCAPED 3 Lights Blinking

If the trimmer isn’t charing there are a few other reasons, such as the faulty power outlet, charging cable, charging cradle or trimmer isn’t correctly positioned into the cradle.

How do I know if Manscaped is Charging? 

When the trimmer is plugged into the charger and LED lights are flashing/ blinking, it means the trimmer is securely plugged into and is now charging. 

Sometimes the trimmer fully charge but does not work, it is a common issue that can be resolved by disabling the travel lock.

How do you know if your Manscaped is fully charged?

Since you have plugged your Manscaped into the charger and after two or three hours you examine a blinking light turned into solid, the trimmer is fully charged.

So, unplug it from the charger when the light stop blinking. Now it is fully charged and does not need to be charged more.

How to Turn the LED Light On & Off on? Manscaped / Lawn Mower 4.0 

If you want to turn the LED light OFF from your Manscaped Lawn Mower 4.0, there is a simple step you should follow. 

  1. Turn your Manscaped ON (press the power button once) 
  2. Then press and hold the power button until the LED light turns OFF
  3. To turn the light ON again, press and hold the power button until the lights start illuming 
  4. Press once the power button to turn your trimmer OFF 

Why are the LED lights not turning ON?

While not any light flashes or blinks on your Manscaped, it means the battery is completely drained and needs to be charged instantly.

Once the battery is fully drained, it will ultimately take a couple of hours to be charged completely. 

While you plug it into the LED, it will start blinking/ flashing, which indicates your trimmer is charging. Once the light stops blinking and appears solid, the trimmer is fully charged and ready to use.

Contact Manufacturer

So, if are fall into a problem charging your Manscaped you should contact Manscaped customer support.

Customer support will be able to assist you with more explicit instructions. 


Here is why your Manscaped trimmer blinking 3 lights and possible solutions:

  • Trimmer indicates that it’s the battery is low
  • Check and fix your power supply
  • Replace faulty battery

Did I forget something?

Now I’d like to hear from you:

Was this blog post helpful to you? Did you understand why your Manscaped is blinking three lights?

Let me know by leaving a comment down below right now.

Read Also:

Beard Trimmer Stopped Working

Is It Safe to Use Trimmer Without Guard

Leave a Comment

Your email address will not be published. Required fields are marked *