You are facing an issue with your Remington straightener that isn’t turning on. It is a common issue that many Remington users have reported.
But don’t worry because in this article I will share a few possible solutions that will help you to resolve your hair straightener.
Here are a few possible solutions including; fixing the power button, checking and troubleshooting the power cable, and using the right power source. Another step is to fix the faulty LED display and plus-minus temperature buttons.
Let’s take a deep look at possible solutions. Let’s get started!
How to Fix Remington Straightener Won’t Turn ON
These are the solutions that you should try to fix your Remington straightener.
Faulty Power Button
If your Remington straightener doesn’t turn on, the first possible cause could be a faulty power button. The power button is an essential component that allows you to turn the straightener on and off.
If it’s not working correctly, the straightener won’t be able to function. Sometimes, the power button may become stuck or not register your press, preventing the straightener from turning on.
If you suspect that the power button is the issue, there are a few steps you can try to fix it.
First, try pressing the power button firmly and repeatedly to see if it becomes unstuck.
If this doesn’t work, try using a toothpick or a small, pointed object to gently pry the button out and clean any debris or dirt preventing it from functioning correctly.
If the button still doesn’t work, you may need to replace it. You can usually do this by disassembling the straightener and accessing the power button directly.
And you will need a solder gun; simply solder the disconnected power button connection. Put the straightener back together, and verify if the issue is fixed.
Broken power cord
Another potential cause could be a damaged or worn power cord. The power cord is an essential component that provides electricity to the straightener, and if it’s not functioning correctly, the straightener won’t be able to turn on.
Sometimes, the power cord may become frayed or damaged, preventing electricity from reaching the straightener.
In other cases, the cord may be worn out or not correctly connected to the straightener, causing a similar issue.
If you suspect that the power cord is the issue, there are a few steps you can take to try and fix it. First, carefully inspect the power cord for any visible signs of damage or wear.
If you see any fraying, kinking, or other damage, the cord may need to be replaced. In this case, it’s best to seek a professional for assistance.
The issue may be a loose or disconnected wire inside the straightener if you don’t see any visible damage or wear on the power cord.
In this case, you may need to open the straightener to access the wire and check for any loose connections.
Be sure to unplug the straightener before attempting any repairs, and follow the instructions in the user manual carefully to avoid damaging the device.
Faulty Power Source
If your Remington straightener doesn’t turn on, a possible cause could be a faulty power source. While you are using a faulty power source will be unable to turn it on.
The power source is the outlet or device that provides electricity to the straightener, if it’s not functioning correctly, the straightener won’t be able to turn on.
In some cases, the power source may be faulty or not provide enough electricity to the straightener, preventing it from turning on.
In other cases, the straightener may not be properly connected to the power source, causing a similar issue.
If you suspect that the power source is the issue, there are a few steps you can take to try and fix it.
First, check the power source to ensure that it’s functioning correctly and providing enough electricity to the straightener.
You can try plugging a different device into the same outlet to see if it works properly.
Next, ensure that the straightener is securely plugged into the power source. In some cases, the plug may become loose or may not be fully inserted into the outlet, preventing the straightener from turning on.
Try removing the plug and reinserting it firmly into the outlet to ensure a secure connection.
Faulty Plus Temperature Button
Another potential cause could be a faulty plus (+) temperature button. The plus temperature button is a crucial component that allows you to increase the heat setting on the straightener, and if it’s not working correctly, the straightener may not turn on at all.
Sometimes, the button may become stuck, preventing the straightener from turning on.
If you suspect the plus temperature button is the issue, there are a few steps you can try to fix.
First, try pressing the button firmly and repeatedly to see if it becomes unstuck. If the button still doesn’t work, you may need to replace it.
This can usually be done by removing the outer housing of the straightener and accessing the plus temperature button directly.
Connect the loose or disconnected wire to the primary circuit with the help of a soldering gun.
Faulty Minus Temperature Button
Another common reason could be a faulty minus (-) temperature button. The minus temperature button is a critical component that allows you to decrease the heat setting on the straightener, and if it’s not working correctly, the straightener may not turn on at all.
Sometimes, the button may become stuck or not register your press, preventing the straightener from turning on.
To troubleshoot a faulty minus temperature button on your Remington straightener, you may need to disassemble the device to access the circuit board.
Consult the user manual or a disassembly guide to safely open up the straightener.
Once the straightener is open, look at the circuit board to see if the minus temperature button is connected and functioning correctly.
Inspect the components on the circuit board for any signs of damage or malfunction. If any component on the board looks or smells like it is burning, it will need to be replaced.
The LED display is faulty
If you have a faulty LED display or a broken connection on the circuit board issues. This will cause the straightener to not turn on.
To fix it, you should check for a broken connection on the circuit board; you will need to open the wand of the straightener and inspect the circuit board for any visible signs of damage.
If you notice a broken connection, you may need to replace the faulty screen or circuit board to get the straightener working again.
If you are unfamiliar with electronic repairs, it is recommended that you take your Remington straightener to a qualified repair technician who can diagnose the issue and make any necessary repairs.
Attempting to repair a faulty straightener yourself can be dangerous and may cause further damage to the device.
Replace/ Contact Manufacture
Once you have tried all the above solutions, it still does not turn ON the issue is that the straightener may have a faulty internal component. If this is the case, the best action is to contact the manufacturer.
Customer support can provide guidance on how to proceed and may even offer a replacement or repair under the terms of the warranty.
If the straightener is no longer under warranty or the manufacturer cannot assist, it may be necessary to replace the device.
Final Thoughts
These are possible solutions that you should try to fix your Remington straightener:
- Check and replace the power cable
- Use another power source
- Inspect the power button
- Fix the plus and minus button
- Fix faulty LED display
Did I Forget Something?
Now I’d like to hear from you:
Which one was the reason for your Remington straightener? Did you get it fixed?
Let me know in the comment down below!
Read Also:
Remington Straightener Not Heating Up (Fixed)
Why is my BaByliss straightener not heating up
